The stainless steel used in all Poul Kjærholm furniture is produced by an Italian steel manufacturer, using stainless steel scraps from all over Europe. As Republic of Fritz Hansen™ only uses a very carefully selected steel supplier, the quality and hardness are of a uniformly high standard. Cutting and grinding takes place in Nakskov, Denmark.
MAINTENANCE & CARE
Clean the steel by using a soft cloth soaked in spirits, if greasy or stubborn spots are not removed rub the spots with a cloth soaked in benzin.
Do not use chlorine based liquids on the steel as this will cause the steel to rust.
Make sure to dry off the steel with a dry cloth after cleaning floors to avoid spots on the steel.
Products available with Steel
DOWNLOADS & INFORMATION